Document ID: 2208430

Special Tools

J 41623-B - 3/8 Inch Cooler Quick Connect Tool
DT 47731 - 1/2 Inch Quick Connect Release Tool

Removal Procedure

Install the J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool onto the engine oil cooler (EOC) pipe.

Click for full-size image
Slide the J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool toward the EOC pipe fitting.

Click for full-size image

Note: Rotate the J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool to engage the EOC pipe fitting's retainer slots.

The J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool should be nearly flush with the fitting.

Connect the J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool onto the EOC pipe fitting.

Click for full-size image
Rotate the J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool until the retainer clip (1) rises above the fitting retainer seat.

Click for full-size image
Pull back on the EOC pipe to disengage the pipe from the EOC pipe fitting.

Click for full-size image
Remove the J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool from the EOC pipe.

Installation Procedure

Note: Inspect the EOC pipe fitting and retaining clip for signs of wear or damage. Replace the components if necessary.

Install the EOC pipe into the EOC pipe fitting.
A distinct snap should be heard or felt when assembling the EOC pipe to the fitting.

Click for full-size image
To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.

Oil Line