Document ID: 2665111

Warning: Refer to Safety Glasses Warning.

Turn the ignition OFF.
Remove the power brake booster auxiliary pump. Refer to Power Brake Booster Auxiliary Pump Replacement.
Remove the camshaft position (CMP) actuator valve electrical connector (1) from the CMP (2).

Click for full-size image
Remove the CMP actuator solenoid valve to engine front cover retaining bolt (1).

Click for full-size image
Remove the CMP actuator valve (2).
Inspect the CMP actuator valve seal and replace as necessary.

Inspect the CMP actuator valve seal for damage. Replace the seal if necessary.
Install the CMP actuator valve (2) to the engine front cover.

Click for full-size image

Caution: Refer to Fastener Caution.

Install the CMP actuator solenoid valve to engine front cover retaining bolt (1).
Tighten

Tighten the bolt to 9 Nm (80 lb in).
Install the CMP valve electrical connector (1) to the CMP actuator valve.

Click for full-size image
Install the power brake booster auxiliary pump. Refer to Power Brake Booster Auxiliary Pump Replacement.

Document ID: 2665109

Turn the ignition OFF.
Remove the power brake booster auxiliary pump. Refer to Power Brake Booster Auxiliary Pump Replacement.
Remove the camshaft position (CMP) actuator valve electrical connector (1) from the CMP sensor (2).

Click for full-size image
Remove the CMP actuator solenoid valve to engine front cover retaining bolt (1).

Click for full-size image
Remove the CMP actuator valve (2) from the engine front cover.
Inspect the CMP actuator valve seal and replace as necessary.

Inspect the CMP actuator valve seal for damage. Replace the seal if necessary.
Install the CMP actuator valve (2) to the engine front cover.

Click for full-size image

Caution: Refer to Fastener Caution.

Install the CMP actuator solenoid valve to engine front cover retaining bolt (1) and tighten to 9 Nm (80 lb in).
Install the CMP actuator valve electrical connector (1) to the CMP sensor (2).

Click for full-size image
Install the power brake booster auxiliary pump. Refer to Power Brake Booster Auxiliary Pump Replacement.

Document ID: 2674146

Ignition OFF.
Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front.

Warning: Refer to Safety Glasses Warning.

Use compressed air to remove debris from the camshaft position (CMP) actuator solenoid valve and surrounding cavities.

Click for full-size image
Remove the CMP actuator solenoid valve electrical connector (1) from the CMP actuator solenoid valve (2).
Remove the CMP actuator solenoid valve to engine front cover retaining bolt (3).
Remove the CMP actuator solenoid valve (2) from the engine.

Inspect the CMP actuator solenoid valve seal for damage. Replace the CMP actuator solenoid valve seal if necessary. Refer Engine Front Cover Disassemble
Install the CMP actuator solenoid valve (2) to the engine.

Click for full-size image

Caution: Refer to Fastener Caution.

Install the CMP actuator solenoid valve to engine front cover retaining bolt (3) and tighten to 9 Nm (80 lb in).
Connect the CMP actuator solenoid valve electrical connector (1) to the CMP actuator solenoid valve (2).
Install the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front.

Document ID: 2674123

Note: Do not disconnect the power steering fluid lines/hoses from the reservoir.

Remove the power steering fluid reservoir bolts and reposition the power steering fluid reservoir in order to provide access. Refer to Power Steering Fluid Reservoir Replacement.
Remove the camshaft position (CMP) actuator valve electrical connector (1) from the CMP actuator (2).

Click for full-size image
Remove the CMP actuator solenoid valve to engine front cover retaining bolt (1).

Click for full-size image
Remove the CMP actuator valve (2) from the engine front cover.
Inspect the CMP actuator valve seal for damage and replace as necessary.

Inspect the CMP actuator valve seal for damage. Replace the seal if necessary.
Install the CMP actuator valve (2) to the engine front cover.

Click for full-size image

Caution: Refer to Fastener Caution.

Install the CMP actuator solenoid valve to engine front cover retaining bolt (1) and tighten to 9 Nm (80 lb in).
Install the CMP actuator valve electrical connector (1) to the CMP actuator valve (2).

Click for full-size image
Install the power steering fluid reservoir. Refer to Power Steering Fluid Reservoir Replacement.

Variable Valve Timing Solenoid