Document ID: 2668091

Callout

Component Name

1

Oil Filler Cap

2

Procedure

Document ID: 2668099

Callout

Component Name

Preliminary Procedure

1

Rear Intake manifold Cover Retainer (QTY:2)

2

Rear Intake Manifold Cover

Document ID: 2668183

Remove the intake manifold cover (2). Refer to Intake Manifold Cover Replacement - Front.

Click for full-size image
Remove the rear intake manifold cover retainers (1).

Click for full-size image
Remove the rear intake manifold cover (2).
Remove the PCV dirty air tube (1) from the right camshaft cover.

Click for full-size image
Remove the PCV dirty air tube (1) from the intake manifold.
Remove the fuel pipe shield (2) to intake manifold bolts (1).

Click for full-size image
Remove the air outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
Disconnect the brake booster vacuum hose (2) from the intake manifold.

Click for full-size image
Remove electrical connector and hose from the purge solenoid (4)
Disconnect the throttle body electrical connector (3).
Disconnect the map sensor connector (1).
Remove the intake manifold bolts (1).

Click for full-size image
Remove the intake manifold (2) and gasket (3).
If replacing the intake manifold, disassemble the intake manifold. Refer to Intake Manifold Disassemble.

If installing a new intake manifold, assemble the intake manifold. Refer to Intake Manifold Assemble.

Click for full-size image
Install the NEW intake manifold gasket (3).
Position the intake manifold (2) and hand start the manifold bolts (1).

Caution: Refer to Fastener Caution.

Tighten the intake manifold bolts in the sequence shown to 25 Nm (18 lb ft).

Click for full-size image
Tighten the intake manifold bolts a second pass in sequence to 25 Nm (18 lb ft).
Connect the brake booster vacuum hose (2) to the intake manifold.

Click for full-size image
Connect electrical connector and hose from the purge solenoid (4)
Connect the throttle body electrical connector (3).
Connect the map sensor connector (1).
Install the PCV dirty air tube (1) to the right camshaft cover.

Click for full-size image
Install the PCV dirty air tube (1) to the intake manifold.
Install the air outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
Install the fuel pipe shield (2) to intake manifold bolts (1) and tighten to 10 Nm (89 lb in).

Click for full-size image
Install the rear intake manifold cover (2).

Click for full-size image
Install the rear intake manifold cover retainers (1).
Install the intake manifold cover (2). Refer to Intake Manifold Cover Replacement - Front.

Click for full-size image

Item	Variant	Part #	Price
Intake Manifold · Upper	Intake Manifold	12642700	$463.71
Intake Manifold · Lower	Intake Manifold	12611155	$475.76