Document ID: 2211146

Remove the exhaust muffler intermediate heat shield. Refer to Exhaust Muffler Intermediate Heat Shield Replacement.
Pull the rear park brake cables forward and disengage the front park brake cable from the equalizer (1).

Click for full-size image
Remove the front park brake cable retainer nut (1).

Click for full-size image
Release the front park brake cable pass through grommet (2) from the driveline tunnel by pressing the grommet inward.
Lower the vehicle.
Remove the front floor console. Refer to Front Floor Console Replacement.
Disconnect the park brake indicator switch electrical connector.

Click for full-size image
Remove the park brake lever nuts (1).
Remove the park brake lever assembly.
Route the front park brake cable and grommet through the hole in the driveline tunnel.

Route the front park brake cable and grommet through the hole in the driveline tunnel.

Click for full-size image
Install the park brake lever assembly.

Caution: Refer to Fastener Caution.

Install the park brake lever nuts (1) and tighten to 22 Nm (16 lb ft).
Connect the park brake indicator switch electrical connector.
Install the front floor console. Refer to Front Floor Console Replacement.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Install the front park brake cable retainer nut (1) and tighten to 7 Nm (61 lb in).

Click for full-size image
Seat the front park brake cable pass through grommet (2) in the driveline tunnel.
Pull the rear park brake cables forward and connect the front park brake cable to the equalizer (1).

Click for full-size image
Install the exhaust muffler intermediate heat shield. Refer to Exhaust Muffler Intermediate Heat Shield Replacement.
Apply and release the park brake lever 3–4 times to ensure proper operation.

Parking Brake Lever