Document ID: 2210979

Click for full-size image

Callout

Component Name

Preliminary Procedure

Remove the power steering fluid reservoir. Refer to Power Steering Fluid Reservoir Replacement.

1

Power Steering Fluid Reservoir Bracket Bolt (Qty: 2)

Caution: Refer to Fastener Caution.

Tighten

9 Nm (80 lb in)

2

Power Steering Fluid Reservoir Bracket

Document ID: 2210902

Click for full-size image

Callout

Component Name

Caution: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.

Preliminary Procedures

Remove the front intake manifold cover. Refer to Intake Manifold Cover Replacement - Front.
Place drain pans under the vehicle.
Remove as much power steering fluid from the reservoir as possible.
Disconnect the power steering fluid reservoir outlet hose from the power steering fluid reservoir. Cap the power steering fluid reservoir outlet hose.
Disconnect the power steering fluid cooler outlet hose from the power steering fluid reservoir. Cap the power steering fluid cooler outlet hose.

1

Power Steering Fluid Reservoir

Procedure

Release the clip and slide the power steering fluid reservoir off of the power steering fluid reservoir bracket.
Fill the power steering fluid reservoir. Refer to Checking and Adding Power Steering Fluid.
Clean any excess power steering fluid from the vehicle.

Operation	Task	Skill	Hours
Remove & Replace	Power Hydraulic · P/S Pump & Hoses · Reservoir Hose, R&R	B	0.4
Remove & Replace	Power Hydraulic · P/S Pump & Hoses · Reservoir, R&R	B	0.8