Document ID: 2196798

It is only necessary to lower the headliner. Only do those steps in the headliner replacement procedure that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement.

Note: If the sunroof window is partially closed, remove the actuator/motor first before moving the sunroof window forward to the close position.

Disconnect the actuator/motor harness from the sunroof frame.
Disconnect the electrical connector from the sunroof actuator/motor.
Remove the sunroof actuator/motor bolts (1) from the sunroof frame.

Click for full-size image
Remove the sunroof actuator/motor (2) from the sunroof frame.

Install the sunroof actuator/motor (2) to the sunroof frame.

Click for full-size image

Caution: Refer to Fastener Caution.

Install the sunroof actuator/motor bolts (1) and tighten to 5 Nm (44 lb in).
Connect the electrical connector to the sunroof actuator/motor.
Secure the electrical harness to the sunroof frame.
Ensure the motor/actuator initialization teach process has been done. Refer to Sunroof/Sunshade Motor Initialization.
Verify the proper operation of the sunroof before securing the headliner.
Install the headliner. Refer to Headlining Trim Panel Replacement.

Sunroof / Moonroof Motor