Tire Pressure Monitor Receiver / Transponder

- Removal

1. Disconnect the negative (-) battery terminal.

2. Remove the glove box.
   (Refer to Body - "Glove Box Upper Cover Assembly")

3. Remove the smart key unit.
   (Refer to Body - "Smart Key Unit")

4. Disconnect the body control module connectors (A).

   

5. Remove the body control module (A) after loosening the mounting nuts.

   

- Installation

1. Install the body control module.

2. Connect the body control module.

3. Install the glove box upper cover assembly.

- Adjustment

Diagnosis procedure by using diagnostic device

1. Connect self-diagnosis connector(16pins) located in the lower of driver side crash pad to self-diagnosis device, and then turn the self-diagnosis device after key is ON.

2. Select the "vehicle model" and "TPMS" on GDS vehicle selection screen, then select OK.

   [Sensor ID Writing]

   

   

   [Vehicle name input initialization]

   

   

   [VIN input initialization]