- Replacement
[Front door side weatherstrip]
-
Loosen the front door checker (B) mounting bolt.
Tightening torque :18.6 - 28.4 N.m (1.7 - 2.2 kgf.m,13.7 - 21.0 lb-ft)
-
Detach the clips, then remove the front door side weatherstrip (A).
-
To intall, reverse the removal procedure.
-
Replace any damaged clips (or pin-type retainers).
-
[Front door body side weatherstrip]
-
Detach the clips, then remove the front door body side weatherstrip (A).
-
To intall, reverse the removal procedure.
-
Replace any damaged clips (or pin-type retainers).
-
- Replacement
-
Pull down the front door window glass to the lowest level by pressing the power window glass switch.
-
After loosening the mounting screws, remove the front door belt outside weatherstrip (A).
Tightening torque :1.0 - 2.0 N.m (0.1 - 0.2 kgf.m, 0.7 - 1.4 lb-ft)
-
To intall, reverse the removal procedure.
-
Replace any damaged clips (or pin-type retainers).
-
- Replacement
-
Remove the front door trim.
-
Remove the front door belt inside weatherstrip (A).
-
To intall, reverse the removal procedure.
-
When installing, install it by first contacting the inside part (basis point of assembly) of arrow to door frame.
-
Replace any damaged clips (or pin-type retainers).
-