1. Remove the front scuff plate.
Click for full-size image
2. Remove the fastener.
3. Pull the front side trim in the direction of the arrow and detach clip A and locator pin B.
4. Install in the reverse order of removal.
HEAD IMPACT PAD REMOVAL/INSTALLATION
1. Remove the following parts:
1. Console (4 door)
2. A-pillar trim
3. Front scuff plate
4. Rear scuff plate
5. B-pillar lower trim
6. Upper anchor of the front seat belt
7. B-pillar upper trim
8. Rear seat
9. Tire house trim
10.Trunk side upper trim (5 door)
11.C-pillar trim
12.Map light
13.Sunvisor
14.Assist handle
15.Headliner
Click for full-size image
2. Remove the fastener. (Rear)
Click for full-size image
3. Pull the head impact pad outward and detach the clips A and the locator pins B.
4. Remove the head impact pad.
5. Install in the reverse order of removal.