Document ID: 2183951
- Cycle the sunroof window from full open to closed position.
- Loosen the adjusting screws on the window.
Click for full-size image
- Adjust the corners of the front window panel using the following guidelines:
- Adjust the front of the sunroof window to 0.0 mm − 1.0 mm (0.0 in − 0.04 in ) below the top surface of the roof panel.
- Adjust the rear center line of the sunroof window to 2 mm − 3 mm (0.08 in − 0.12 in ) above the top surface of the roof panel.
- Tighten the sunroof window adjustment screws to 8.5 Nm (75 lb in).
- Cycle sunroof window through all positions.
- Inspect the sunroof window adjustment. Adjust if necessary.
Note: Correct adjustment cannot be achieved if the sunroof window is closed from vent position.
Note: Do Not remove or lower headliner to access sunroof window screws.
Caution: Refer to Fastener Caution