Slip Yoke

Removal Procedure

1. Remove the propeller shaft. Two-Piece Propeller Shaft Replacement
Note: Mark the front propeller shaft to the slip yoke prior to removal of the boot. Failure to do so could cause the propeller shaft to be out of balance.

2. Mark the in the notch (1) in the front propeller shaft with the V (2) on the slip yoke.
   
   Click for full-size image
   
3. Remove the propeller shaft boot (2) from the propeller shaft (1).
   
   Click for full-size image
   

Installation Procedure

1. Ensure that the marks on the propeller shaft and the slip joint yoke are aligned
   
   Click for full-size image
   
Note: When installing the boot on the propeller shaft or the slip joint, snap or click should be heard or felt.

2. Install the boot (2) on the propeller shaft (1).
   
   Click for full-size image
   
3. Install the boot (2) on the slip joint (3).
4. Install the propeller shaft. Two-Piece Propeller Shaft Replacement
5. Perform the Driveline System Balance Adjustment procedure. Driveline System Balance Adjustment