🔧ddiyFamily Car Docs
← 2013 CHEVROLET CAMARO

Communications Control Module

Open PDF ↗
Document ID: 2199585

Click for full-size image
Callout Component Name

Preliminary Procedure

  1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement.
  2. Remove the communication interface module cover, if equipped.
1 Communication Interface Module Battery

Procedure

  1. Disconnect the electrical connector.
  2. Reprogramming of the Module may be necessary after losing battery power.
  3. For programming and set up procedures, refer to Control Module References.


Document ID: 2199587

Click for full-size image
Callout Component Name

Preliminary Procedure

  1. Remove the communication interface module. Refer to Communication Interface Module Replacement
  2. Remove the communication interface battery. Refer to Communication Interface Module Battery Replacement
1 Communication Interface Module Bracket Bolt Screw (Qty: 2)
Caution: Refer to Fastener Caution.
Tighten

10 Nm (89 lb in)
2 Communication Interface Module Bracket


Document ID: 2199584

Click for full-size image
Callout Component Name

Preliminary Procedure

  1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement.
  2. Remove the communication interface module cover, if equipped.
1 Communication Interface Module

Procedure

  1. Disconnect the electrical connections.
  2. If replacing the communication interface module be sure to transfer Bluetooth antenna, if equipped.
  3. For programming and set up procedures, refer to Control Module References.


Family notes
No notes yet. Add tips, torque specs the family reuses, pick lists.