🔧ddiyFamily Car Docs
← 2013 CHEVROLET CAMARO

Back Window Glass Moulding / Trim

Open PDF ↗
Document ID: 2540039

Click for full-size image
Callout Component Name
1 Rear Window Upper Reveal Molding Retainer (Qty:4)
2 Rear Window Upper Reveal Molding

Procedure

  1. Open the rear compartment lid in order to access the rear lamp electrical harness.
  2. Disengage the electrical grommet from the rear window drain panel.
  3. Disconnect the electrical connector from the rear lamp electrical harness.
  4. Apply tape around the outside perimeter of the reveal molding.
  5. Using a plastic tool, apply adequate pressure upward to release the retainers and reveal molding from the vehicle.
  6. Replace all broken retainers
  7. Transfer the high mount stop lamp.
Tip: Using a suitable tool, insert the grommet into the rear window drain panel.


Family notes
No notes yet. Add tips, torque specs the family reuses, pick lists.