- Replacement
-
Remove the rear door trim.
-
Remove the rear door belt inside weatherstrip (A).
-
To intall, reverse the removal procedure.
-
When installing, install it by first contacting the inside part (basis point of assembly) of arrow to door frame.
-
Replace any damaged clips.
-
- Replacement
-
Loosen the rear door checker (B) mounting bolt.
Tightening torque :16.7 - 21.6 N.m (1.7 - 2.2 kgf.m,12.3 - 15.9 lb-ft)
-
Detach the clips, remove the rear door side weatherstrip (A).
-
To intall, reverse the removal procedure.
-
Replace any damaged clips.
-
- Replacement
-
Pull down the rear door window glass to the lowest level by pressing the power window glass switch.
-
After loosening the mounting screws, remove the rear door belt outside weatherstrip (A).
-
To intall, reverse the removal procedure.
-
Replace any damaged clips.
-