4 Door
1. Fully lower the rear door glass.
2. Remove the rear beltline molding.
Click for full-size image
3. Adjust the door glass position as shown in the figure.
4. Disconnect the negative battery cable. (Vehicles with power window system)
5. Remove the regulator handle. (Vehicles with manual window system)
6. Remove the rear door trim.
Click for full-size image
7. Remove the bolts and screw.
Click for full-size image
8. Remove the rear door glass guide and glass run channel as a single unit.
9. Remove the hole cover.
Click for full-size image
10. Remove the screw.
11. Lift the rear door glass up and remove while tilting it.
12. Install in the reverse order of removal.
5 Door
1. Fully lower the rear door glass.
2. Remove the sail garnish.
3. Remove the rear door garnish.
4. Remove the rear beltline molding.
Click for full-size image
5. Adjust the door glass position as shown in the figure.
6. Disconnect the negative battery cable. (Vehicles with power window system)
7. Remove the regulator handle. (Vehicles with manual window system)
8. Remove the rear door trim.
Click for full-size image
9. Remove the bolts.
Click for full-size image
10. Remove the rear door glass guide and glass run channel as a single unit.
11. Remove the hole cover.
Click for full-size image
12. Remove the screw.
13. Lift the rear door glass up and remove while tilting it.
14. Install in the reverse order of removal.
REAR DOOR QUARTER GLASS REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (Vehicles with power window system)
2. Remove the rear beltline molding.
3. Remove the regulator handle. (Vehicles with manual window system)
4. Remove the rear door trim.
Click for full-size image
5. Remove the rear door quarter glass.
6. Install in the reverse order of removal.