Except Mazdaspeed3
1. Remove the hood insulator.
2. Slightly bend back the mudguard.
Click for full-size image
3. Disconnect joint pipe A.
4. Remove windshield washer hose A from clips A.
5. Remove clips B.
6. Disconnect windshield washer hose B from the washer nozzle.
7. Disconnect windshield washer hose C from the washer nozzle.
8. Disconnect joint pipe B, then remove windshield washer hose A, B and C.
9. Install in the reverse order removal.
Mazdaspeed3
1. Remove the windshield wiper arm and blade
2. Remove the cowl grille
Click for full-size image
3. Disconnect windshield washer hose A from the washer tank.
4. Remove the windshield washer hose A from clips A.
5. Remove the joint pipe B.
6. Remove the clip B.
7. Remove the joint pipes C.
8. Remove the clips C.
9. Disconnect windshield washer hose B from the washer nozzle.
10. Disconnect windshield washer hose C from the washer nozzle.
11. Disconnect joint pipe B, then remove windshield washer hose A, B and C.
12. Install in the reverse order of removal.
REAR WASHER HOSE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Slightly bend back the mudguard (RH).
3. Disconnect the rear washer hose A from the washer tank.
Click for full-size image
4. Remove rear washer hose A from clips A.
5. Remove A-pillar trim (RH).
6. Remove the glove compartment.
7. Remove the dashboard garnish.
8. Disconnect joint pipe, then remove the rear washer hose A.
9. Remove rear washer hose B from the clips B.
10. Remove the following parts.
1. Upper anchor of the front seat belt
2. Front scuff plate
3. Rear scuff plate
4. B-pillar lower trim
5. B-pillar upper trim
6. Rear seat
7. Tire house trim
8. Trunk side upper trim
9. C-pillar trim
10. Map light
11. Sunvisor
12. Assist handle
Click for full-size image
11. Disconnect the joint pipe B.
12. Remove the headliner.
13. Remove rear washer hose B and the tapes.
14. Remove clips C from the body.
15. Disconnect the joint pipe C, then remove rear washer hose C.
16. Remove rear washer hose D from the rear washer nozzle.
17. Install in the reverse order of removal.