1. Disconnect the negative battery cable.
2. Remove the trunk end trim. (4 door)
3. Remove the fasteners and slightly bend back the trunk side trim. (4 door)
4. Remove the service hole cover. (5 door)
Click for full-size image
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
INBOARD LIGHT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the trunk lid trim. (4 door)
3. Remove the service hole cover. (5 door)
Click for full-size image
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Inboard Light Installation Note
Click for full-size image
1. Insert the inboard light into the trunk lid (liftgate) as shown in the figure, then pivot it inward and fix in place.
Click for full-size image
2. Push the bracket onto the trunk lid (liftgate) as shown in the figure and install.