🔧ddiyFamily Car Docs
← 2013 CHEVROLET CAMARO

Convertible Top Latch Position Switch / Sensor

Open PDF ↗
Document ID: 2538455

Click for full-size image
Callout Component Name

Preliminary Procedure

Remove the left rear compartment side trim panel. Refer to Rear Compartment Side Trim Panel Replacement.
1 Roof Retractable Luggage Shade Detection Sensor

Procedure

  1. Disconnect electrical connection.
  2. Slide sensor from retaining clip and unclip connector to remove.


Document ID: 2531835

Click for full-size image
Callout Component Name

Preliminary Procedure

Remove the lower roof front header garnish molding. Refer to Roof Front Header Garnish Molding Replacement - Lower.
1 Roof Retractable Opening Position Switch

Procedure

  1. Disconnect electrical connector.
  2. Depress tabs to remove.


Document ID: 2538451

Click for full-size image
Callout Component Name

Preliminary Procedure

  1. Remove the right side folding top cylinder without disconnecting the hydraulic lines. Refer to Folding Top Cylinder Replacement.
  2. Reposition the folding top pump with motor without disconnecting the hydraulic hoses. Refer to Folding Top Pump with Motor Replacement.
1 Roof Retractable Position Sensor

Procedure

  1. Reposition hydraulic hose to access sensor.
  2. Disconnect sensor connector from pump with motor assembly.
  3. Unclip sensor from cylinder. Sensor wire is secured with tie straps to the hose assembly.
Note: Use suitable tool to insert between hydraulic cylinder and switch to release from hydraulic cylinder.


Family notes
No notes yet. Add tips, torque specs the family reuses, pick lists.